Call now to get tree helping suchlike tree removing, tree fell, bush felling, shrub pruning, stump drop and bunch more across United States.


Call now

Call us now +1 (855) 280-15-30






This machine is capable of amputating hands and feet.

Repeat steps 4 through 8 until you reach the right side of the stump. Return the grinder to the left side of the stump, lower it, and repeat steps 3 through 10 until you have ground the stump into the ground.

Note: To contain the chips, you may need to stop the grinder and move the chip guard up as you move the grinder bushremove.buzz: 79 cm (31 inches). Start the engine, raise the grinder, set the throttle lever to the FAST position, and move the machine to the stump to be ground. Use the grinder control lever and the traction control to position the grinder to the side of the front of the stump, about 2 cm (1 inch) below the surface (Figure 17).Height: cm ( inches).

Replace drive belt. Adjust tension of new belt to 8 kg (18 lb) force and 10 mm ( inch) belt deflection at mid-span.

Tighten the 4 engine-plate mounting bolts and the 4 bolts securing the rear of the belt guard to the engine.

Before using the machine, have the area marked for underground utilities and do not use the machine in marked areas.

Install the belt guard and secure it with the previously removed washers and bushremove.buzzg Depth: 30 cm (12 inches). Start the engine, raise the grinder, set the throttle lever to the FAST position, and move the machine to the stump to be ground. Use the grinder control lever and the traction control to position the grinder to the side of the front of the stump, about 2 cm (1 inch) below the surface (Figure 20).Height: cm (51 inches).

SGR Stump Grinder Model No. Serial No. and Up Model No. G-Serial No. and Up Model No. HD-Serial No. and UpCutting Depth: 30 cm (12 inches).

To replace a tooth, remove the nut securing the tooth, then install a new tooth, washer, and nut in the same position Figure

Some dedicated stump grinders are over-complicated. Not the Toro STX. Its patented Toro Dingo TX-style control system has two simple levers that are simple to learn, master and use. Combine these easy-to-use controls with tracks and transport speeds exceeding 4 Missing: Wilmington MA.